FLUTEC節流閥DV-08-30.1/0技術描述

FLUTEC節流閥DV-08產品介紹

The DV is an inline mounted flow control valve which controls the flow by adjusting the cross-section. The flow rate is therefore dependent on the pressure differential and viscosity. Starting with the throttle spindle in the fully closed position, the flow rate increases in accordance with the appropriate curve as the control knob is turned. The flow is controlled in both directions.

The scale on the lower edge of the control knob enables accurate repeat setting. The DRV is a flow control valve in the same design which also allows the same fine flow adjustment, but in one direction only. Unrestricted flow in the reverse direction is via the built-in check valve (cracking pressure 0.5 bar).

DV是一種內聯安裝流量控制閥，通過調節橫截面來控制流量。因此，流量取決于壓差和粘度。從節氣門主軸處于完全關閉位置開始，隨著控制旋鈕的轉動，流量按照適當?shù)那€增加。流量是雙向控制的。

控制旋鈕下緣的刻度可實現精確的重復設置。DRV是一種采用相同設計的流量控制閥，也允許進行相同的精細流量調節，但僅限于一個方向。 通過內置止回閥（開啟壓力 0.5 bar）可實現反向不受限制的流動。

FLUTEC節流閥DV*-08系列其他常用型號：

FLUTEC DV-06-01.4/0

FLUTEC DV-08-01.4/0

FLUTEC DV-10-01.4/0

FLUTEC DV-12-01.4/0

FLUTEC DV-16-01.4/0

FLUTEC DV-08-30.1/0

FLUTEC Control valve NEW + ORIGINAL+ ONE YEAR WARRANTY

愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于FLUTEC節流閥DV-08-30.1/0的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。

If you have any question for FLUTEC products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.dljtgw.com.

FLUTEC節流閥DV-08-30.1/0介紹